Blesk Yongnuo 565EX III pre Canon

Podrobný popis

The Yongnuo YN565EX III is the third installment of one of the most popular flashes in the Yongnuo brand's range, designed to work with Canon cameras. Its high power, numerous features and remote control capability make it an essential tool in every photographer's bag. High power and precise control The YN565EX III reporter flash for Canon cameras features a high flash guide number of GN 58. The high flash power combined with a wide control range (from 1/1 to 1/128, in 1/3 EV steps) allows you to precisely select the correct value for the scene. Operation modes The flash offers three modes of operation: manual, strobe and E-TTL automatic, allowing the user to easily achieve the desired effect. Manual mode (M) gives the user full control over the flash parameters. In manual mode, the flash power is set manually by the user. Stroboscopic mode (Multi) allows a series of flashes to be fired during a single exposure, allowing creative photography to be created to depict the movement of the subject in the frame. Automatic mode (E-TTL) is ideally suited to applications where time is of the essence, such as reportage, weddings, etc. In this mode, the flash in cooperation with the camera selects the power of the flash based on the information collected from the metering flash. Multiple triggering methods Version III of the Yongnuo YN565EX reporter flash can be triggered in a number of ways. ISO shoe - the lamp attached using the hot shoe directly to the camera sled or radio trigger. Pc connector - using a cable with a traditional PC sync connector. Pc connector - using a cable with a traditional PC sync connector. Optical flash control system with auto transfer, compatible with Canon and Nikon flash brands (Sn and Sc) Traditional flash triggering (S1 and S2 modes), i.e. using a photocell that reacts to the first flash of another flash (S1) or additionally intelligently bypassing the pre-flash metering of another flash (S2). Flash power compensation (FEC) This is a function that allows you to influence the flash power of a flash unit operating in E-TTL automatic mode. When compensation is set, all flashes will be performed with power correction to help achieve the photographer's intended effect. For example, setting the FEC to -1 EV will reduce the power of the flashes so that the subject being illuminated is underexposed by 1 exposure value. Flash power bracketing (FEB) The flash power bracketing function is a useful tool, especially in situations where the lighting in the scene changes dynamically or where the user is unsure how much power to illuminate the frame. The bracketing setting causes three consecutive flashes to be taken at different power (e.g. underexposed photo, correctly exposed photo, overexposed photo). This function increases the likelihood of taking a correctly exposed photo in difficult lighting conditions. First or second curtain synchronisation The mode allows you to creatively use the flash effect at the beginning or end of the exposure. The YN565EX III reporter flash offers both first-curtain (beginning of exposure) and second-curtain (end of exposure) flash synchronisation, allowing you to significantly change the character of the images you receive. Triggering the flash to the second curtain allows you to capture the effect of movement behind the subject, such as streaks behind a moving car. In the case of a first-curtain flash, the blur registered thanks to the reflected light is in front of the moving subject in the frame. Flash direction and angle - light of different nature The solutions implemented in the Yongnuo YN565EX III reporter flash allow you to freely shape the character of the emitted light in a fraction of a second. The movable torch with automatic (and manual) zoom, diffuser and reflector allow you to creatively select the lighting for the selected scene. Continuous ready to go The systems used in the flash have reduced the time between two discharges (at full power and basic power) to just 2 seconds, so the unit provides almost continuous standby. Universal power supply The primary power source for the Yongnuo YN565EX III flash is four AA-type cells (batteries or rechargeable batteries). Compatibility with universal cells, commonly available in shops around the world, makes the flash can be used virtually anywhere. In addition, to optimise lamp operation, it is equipped with an energy-saving function that automatically switches off the lamp in the event of prolonged inactivity. High performance To further increase the performance of the unit, an external battery tray or power bank such as the YN5200 can be connected. The additional external power source allows you to shorten the time between flashes and extend the runtime without having to change batteries. Assist AF A front-facing auto-focus assist LED makes it easy to capture perfectly sharp images in adverse lighting conditions. Easy control An easy-to-read backlit LCD display and intuitive and feature-rich menus make it easy to navigate the flash functions, while large and comfortable buttons ensure comfortable operation even when wearing gloves. It is also possible to turn on and off beeps to indicate when the flash is charged and ready to flash again. For use with newer Canon cameras, control of the flash parameters is available from the camera menu. Long life The components of the YN565EX III flash unit are made from high quality materials for long life. An advanced system protects the components from overheating. If the device detects an elevated temperature, the protection mechanism will inform the user and then limit the available functions, thus protecting the flash from damage. Full compatibility A mini-USB port for software updates ensures that the flash is compatible with new camera models. Specifications guide count: GN 58 (ISO 100, 105 mm) flash power adjustment: 1/128 - 1/1, in 1/3 EV steps modes of operation: automatic E-TTL / manual / stroboscopic trigger methods: ISO foot - on camera sockets or radio trigger PC connector Optical flash control system with automatic transfer, compatible with Canon and Nikon flashes (Sn and Sc) - Slave mode Traditional triggering with radio triggering Traditional flash triggering (S1 and S2) flaser zoom: 24, 28, 35, 50, 70, 80, 105 mm range of vertical torch movement: -7° - 90° range of horizontal burner movement: 0° - 270° burner recharge time: up to approx. 2 s colour temperature: -7° - 90° flash colour temperature: 5600 K flash time: 1/200 - 1/20000 s shutter speed synchronisation up to 1/8000 s optical trigger range: 10 - 25 m dimensions: 7.8 x 19.0 x 6.0 cm weight: 380 g (without accessories) power supply: 4 x AA batteries (capacity: 100 - 1500 flashes) attachment: hot shoe, 1/4" female tripod mount in the flash stand ports: mini USB, PC Compatibility Canon cameras equipped with an ISO standard hot shoe Canon cameras equipped with a PC socket (using PC sync cable) in optical flash control mode: in Slave role compatible with: Yongnuo YN600EX-RT II, YN568EX II, Canon 580EX II, Nikon SB-700, SB-800, SB -900, SB-910 and built-in flashes of Canon (600D, 60D, 7D) and Nikon cameras. in S1 and S2 mode, compatible with most flash units on the market Kit contents YN565EX III flash for Canon base case